| Testes |
Behavior tests for material & equipments i.e., electric motors , gears, electrical & electronic parts, cables, plastic material, rubber, oil & grease etc. |
| Application |
Shock tests for metals & other materials for the cold- shrinking of building elements, e.g. Shafts, Bolts, Gearwheels, Bearings etc. for the hardening of materials in order to achieve better toughness or
hardness. (Ultra Deep Freezer) |
| Temperature
range |
Digital display Electronic Temperature controller / P.I.D Controller. |
| Temp.
Sensor |
PT 100 Sensor mounted inside the chamber suspended in air. |
| Inner
Chamber |
Made of stainless steel 304 quality duly polished. The working chamber is completely free for use |
| Outer
Chamber |
The outer housing is made of galvanized steel sheet powder coated or complete Stainless Steel. |
| Cooling
Coil |
Cooling element is embedded from outer side of the working chamber. |
| Condenser
Coil |
The Heat Exchanger coil is air-cooled condenser, arranged on right / bottom in Equipment. |
| Cascade
system |
Cascade system insulated with PUF for Ultra Deep Freezer. |
| Refrigerant |
CFC free refrigerant. |
| Insulation |
Polyurethane foam
“PUF”. |
| Door |
Double Door system with Inner Glass door to avoid temperature loss.Heavy Hinges and lock arrangement. |
| Power
Source |
Electrical supply 220 volts single phase AC electrical connection complete with cable & plug. |
| Caster |
Two fixed & two swiveling. |
(Optional)
Alarm device |
For protection of materials, which are sensitive to temperature changes. An acoustic signal is given if the space temp. rises or if power supply fails, independent of the main. Battery operated, alarm buzzer. |
| Note
: The Unit should be always connected through a voltage stabilizer (strongly Recommended ) |
