| Testes |
Behavior
tests for material & equipments i.e.,
electric motors , gears, electrical &
electronic parts, cables, plastic material,
rubber, oil & grease etc. |
| Application |
Shock
tests for metals & other materials for
the cold- shrinking of building elements,
e.g. Shafts, Bolts, Gearwheels, Bearings
etc. for the hardening of materials in order
to achieve better toughness or hardness.
(Ultra Deep Freezer) |
| Temperature
range |
Digital
display Electronic Temperature controller
/ P.I.D Controller. |
| Temp.
Sensor |
PT
100 Sensor mounted inside the chamber suspended
in air. |
| Inner
Chamber |
Made
of stainless steel 304 quality duly polished.
The working chamber is completely free for
use |
| Outer
Chamber |
The
outer housing is made of galvanized steel
sheet powder coated or complete Stainless
Steel. |
| Cooling
Coil |
Cooling
element is embedded from outer side of the
working chamber. |
| Condenser
Coil |
The
Heat Exchanger coil is air-cooled condenser,
arranged on right / bottom in Equipment. |
| Cascade
system |
Cascade
system insulated with PUF for Ultra Deep
Freezer. |
| Refrigerant |
CFC
free refrigerant. |
| Insulation |
Polyurethane
foam “PUF”. |
| Door |
Double
Door system with Inner Glass door to avoid
temperature loss.Heavy Hinges and lock arrangement. |
| Power
Source |
Electrical
supply 220 volts single phase AC electrical
connection complete with cable & plug. |
| Caster |
Two
fixed & two swiveling. |
(Optional)
Alarm device |
For
protection of materials, which are sensitive
to temperature changes. An acoustic signal
is given if the space temp. rises or if
power supply fails, independent of the main.
Battery operated, alarm buzzer. |
| Note
: The Unit should be always connected
through a voltage stabilizer (strongly Recommended
) |
Back | 
